Stir well before use. Always do a patch test on several areas before using. Surfaces must be dry and dust-free before applying. Make sure Chalk Paint is fully dry before applying over the top.
Apply Annie Sloan Metallic Paint using an Annie Sloan Flat Brush or Small Sponge Roller for best results.
Apply one coat for a translucent finish, or two to achieve a lustrous opaque shine. When applying a second coat, allow 3-4 hours for the first coat to fully dry.
Apply one coat for a translucent finish, or two to achieve a lustrous opaque shine. When applying a second coat, allow 3-4 hours for the first coat to fully dry.
Annie Sloan Metallic Paints are not suitable for exterior use.
There is no need to apply Chalk Paint Wax or Lacquer over the top of Annie Sloan Metallic Paints to seal. Like Annie Sloan Satin Paint or Annie Sloan Wall Paint, Metallic Paints have inbuilt protection. However, if you are using Metallic Paints on especially high-traffic areas or you notice that the paint is wearing, we recommend reapplying and finishing with Annie Sloan Chalk Paint Lacquer for added durability.
Each 16 US fluid ounces/473ml tin contains enough paint to cover 3.6m2/40ft2.
Coverage will vary depending on surface, application, and environmental variables.
This product contains VOC <50g.
KEEP OUT OF REACH OF CHILDREN.
Aftercare:
Clean brushes and rollers with warm soapy water immediately after use. To maintain your finish, clean with a damp cloth using mild detergents. Reapply as and when necessary.
